How to cut backsplash off laminate countertop

A laminate countertop should be accompanied by a laminate backsplash. Normally, the backsplash is cut before it is installed. Before installation, you can set the laminate piece on two sawhorses for cutting. What about a carved wood trim?

A good coat of varnish will protect it from the moisture. If you bought a new sink, they probably gave you a template for the thing, that would be the easiest, probably. Laminate countertops usually come in one piece that combines the actual countertop and the backsplash. You can buy a circular saw and the rest of the tools required to cut a laminate countertop at a home improvement or hardware store. Slide the putty knife along the top edge and perimeter of the laminate to cut it loose from the glue.

If you are not able to cut right to the wall using a circular saw, you can finish the cut using an electric jig saw with a fine tooth metal blade or a special laminate blade. The problem with cutting off the backsplash entirely is that the depth of the countertop may be reduced. The distance from front-to-back will be shorter than the depth of the base cabinet.

When you clean the countertop , dirt and debris will fall onto the drawer handles not onto the floor. I want to lay tile over my laminate countertop so I need to cut the backsplash off of it. Many laminate countertops come with an integral backsplash.

Pry it away carefully to avoid damaging the drywall. The countertop is about from the splash to the bullnose, and my. Is it possible to cut the splash off without damaging the top? If I cut off the splash this should correct the overhang of the counter.

Cut away the caulk line along the back of the laminate backsplash. Use a reciprocating saw to cut the existing laminate backsplash off the countertop (Image 3). The key is not to leave any edge sticking up. Just the piece of metal trim the laminate sits in on top of the countertop.

No need for any cutting at the countertop level, just under the top cabinets and around the window. This frees the countertop and also reduces its weight, making it much easier to lift out. First, carefully pry the tile running up the backsplash away from the wall. These are formed laminate countertops , right? Have you considered putting in some wood countertops ? Recutting Installed Countertops In Place.

Japanese backsaw to carefully cut to the line on the backsplash. In this video, Jeff Johnson from Glen Allen, Va. Take off a part of the laminate backsplash by following the method above. Apply a glue dissolving solution behind the laminate backsplash. Let the solution weaken the grip of the glue.

When the glue begins to dissolve, start to peel off the laminate backsplash. Use the circular saw to cut portions of the backsplash. Cut off any stubborn nails with diagonal pliers if the countertop resists coming up off the cabinet jambs.

I just cut the paint away from the backsplash. Removing Laminate Backsplash. Install a laminate countertop to refresh your kitchen or bath’s appearance. You can build a laminate countertop from scratch or purchase a pre-manufactured countertop , which is called a post-form countertop. Post-form countertops are made in standard-sized lengths and come pre-assembled complete with backsplash.

I have a laminate countertop where the laminate extends up the wall in a sheet. Do I need to remove the entire piece of laminate extending up the wall or can I remove it to the same level that the new built in backsplash comes to and then. I would like to remove the metal strip and laminate backsplash and replace with tile.

Will it pop right off , or is it attached anywhere under the countertop. If you're installing a new appliance in the kitchen or remodeling, you may need to cut off the edge of a laminate countertop or make a hole to. How to Cut Laminate Countertops. You’ll get tips on layout, cutting without chipping, and how to make a cut that’s too close to the backsplash for a jigsaw to make. This step by step woodworking project is about how to cut laminate countertop.

Cutting laminate counter top isn’t the easiest diy project, as you need to use proper tools, techniques and work with patience. First, cut the caulk line around the perimeter of the backsplash , so when it pulls away it will not damage the rest of the wall. Then, use a reciprocating saw to cut the countertop at the sink opening. If the splash is wider, then remove the entire counter without trying to take the backsplash off separate, be sure to cut the caulk line first.

If the splash appears to be glued to the wall and not screwed onto the countertop , start the removal process by cutting the caulk line with a razor knife. It is likely glued to the wall with construction adhesive or dabs of caulk, either will result in damage to the surface of the drywall.